Shenzhen Zento Traffic Equipment Co., Ltd.
Secure Your Future with Zento's Cutting-Edge Solutions
Add to Cart
Smart Automatic Side-mounted Door Opener for School Mall Hospital Automatic Door System
Advantages of ZENTO automatic door opener:
* Rebound adjustment when encountering resistance
* Delay adjustment of door opening
* Learning of door opening angle
* Delay door opening function
* Remote door locking function
* Double door linkage function
* Mother-child door function
* Adjustable opening and closing speed
* Support electric lock
* Support secondary development
Automatic door opener function:
Single or double opening selection: Through remote control operation, single leaf can be opened and closed independently or both leaves can be opened and closed simultaneously.
Button lock: Through remote control operation, all buttons on the control panel can be locked to prevent theft.
Repeated operation limit: Prevent over-opening of the door and damage to the door caused by misoperation.
Automatic stop when encountering obstacles: The door opener automatically stops when encountering obstacles such as pedestrians and vehicles to ensure safety.
In-place prompt: When the door is in place and locked reliably, the controller will emit a "beep" prompt sound.
Time protection: The single operation time of the automatic door opener is set within 60 seconds to ensure the safety of the motor.
Infrared protection: Through the external infrared detector, pedestrians or vehicles pass by, and it will stop automatically (select).
ZENTO Automatic Door Parameter
| Power supply voltage | 220VAC+15%50HZ |
| Motor working voltage | 24VDC |
| Angular velocity | 69.7°/S |
| Motor thermal protection | F level 155°C |
| Use frequency | continuous use below 70°C |
| Use environment | indoor or outdoor |
| Body size | 355.7-89.6-105.7mm |
| Packaging size | 400*280*110mm |
| Equipment packaging weight | 6.4kg |
| Motor power | Motor power: 40W |
| Rated torque | 24.6Nm |
| Maximum door opening angle | +90 |
| Maximum door width | 2m (single leaf) |
| Maximum load-bearing capacity | 150kg |
| Operation noise | <60dB |
| Working environment temperature | -25-70°C |
| Fixed base size | 355.5*89mm |
| Drive mode | crank connecting rod drive |